Tektronix 3 Series MDO Mixed Domain Oscilloscope

Ts'ebetso ea Probe e etelletseng pele indastering

Li-probe ha lia lokela ho hlokomolohuoa e le ntho ea bohlokoa tseleng ea matšoao a tekanyo. Ha u reka 3 Series MDO u fumana lisebelisoa tse ntle ka ho fetisisa tsa indasteri mahala. E fana ka tlhahiso e ntle ka ho fetesisa ea 3.9 pF ho oscilloscope ea hau, li-probe tsa TPP Series e tla ba sebaka sa hau sa ho etsa lipatlisiso bakeng sa ts'ebeliso ea letsatsi le letsatsi.

Lintlha-khōlō

• TPP Series probes e kenyelelitse maemo a tloaelehileng. E le 'ngoe ka kanale ea analoge.

• Keketseho e ntle ka ho fetesisa ea matla a indasteri ea 3.9 pF

• 250 MHz, 500 MHz kapa 1 GHz probe bandwidth ho ipapisitse le seletsa sa seletsa

Ho nepahala ha tekanyo ea lets'oao la boemo bo tlase ho ntlafalitsoe ka hoo e ka bang 40%

Ha u lekanya mats'oao a boemo bo tlase, ho bohlokoa ho ba le lerata le lerata le tlase bakeng sa tekanyo e nepahetseng. Qetello e ncha e sebelisitsoeng letotong la 3 MDO e ka u thusa ho ntlafatsa litekanyo tsa hau tsa lerata ka hoo e ka bang 40%. Ha u ntse u hlahloba oscilloscope, etsa bonnete ba hore u hlahloba ka hloko litlhaloso tsa lerata tse sa reroang tsa oscilloscope. Ha se li-oscilloscope tsohle tse entsoeng li lekana, 'me ha se baetsi bohle ba li-oscilloscope ba lekang le ho phatlalatsa litlhaloso tsa bona tsa lerata tse sa reroang.

Sheba litlhaloso tse tiisitsoeng tsa lerata ho Tektronix 3 Series MDO, hammoho le tse ling tse ngata

Lintlha ha u habanya feela

Kena likanale

• 2 kapa 4 analogue

• 16 ea digital1

• 1 spectrum analyzer

Bophahamo ba motlakase1

• 100 MHz, 200 MHz, 350 MHz, 500 MHz, kapa 1 GHz

Mohlala Rate

• 5 GS/s (mohlala oa 1 GHz), 2.5 GS (mefuta e meng kaofela) likanaleng tsa analoge

• Ho fihla ho 8.25 GS/s (121 ps resolution) ho likanale tsa dijithale

Rekota Bolelele

• 10 Mpoints likanaleng tsohle

Spectrum Analyzer1

• 1 GHz standard, 3 GHz boikhethelo

Jenereithara ea lipontšo1

• Arbitrary, Sine, Square, Pulse, Ramp, Triangle, DC Level, Gaussian, Lorentz, Exponential Rise/ Fall, Sin(x)/x, Random Noise, Haversine, Cardiac

Digital Voltmeter2

• Litekanyo tsa motlakase tsa AC+DC tse 4 tsa AC RMS, DC, le AC+DC RMS

Qala Frequency Counter2

• Litekanyo tsa maqhubu a linomoro tse 5

Tlhahlobo e tsoetseng pele1

• Litekanyo tsa Matla a Iketselitsoeng

Tšehetso ea Protocol1

• I2C, SPI

• RS-232, RS-422, RS-485, UART

• CAN, KA FD, LIN, FlexRay

• MIL-STD-1553, ARINC 429

• I2S, LJ, RJ, TDM

• USB 2.0

Pontšo

• 11.6-inch (295 mm)

• HD mmala (1920 x 1080) capacitive touchscreen skrineng

Boima ba 'mele

• 11.7 lbs (5.3 lik'hilograma)

1 - Taba ea boikhethelo ebile e ka ntlafatsoa
2 - Mahala ka ngoliso ea sehlahisoa

Sheba spectrum analyzer e hahelletsoeng mosebetsing.

Sesebelisoa sa spectrum analyzer se hahiloeng ka hare

Hore na o setsebi sa spectrum analyzer kapa u mosebelisi ka linako tse ling, u tla khona ho beha sebatli se hahelletsoeng kahare hore se sebetse. Ho fapana le li-oscilloscopes tse ling tse fanang ka "spectrum analysis" FFT, 3 Series e na le tlhahlobo ea 'nete ea spectrum e hahiloeng hantle.

1 GHz palo e phahameng ea maqhubu a tla e tloaelehileng sesebelisoa se seng le se seng, 3 GHz ke boikhethelo

• Ke eona feela lisebelisoa tsa 'nete tse kopaneng tsa spectrum analyzer sehlopheng sa eona

• Ultra-wide-wide capture bandwidth ho fihla ho 3 GHz

Ea khonang. E ka ntlafatsoa.

Fumana lisebelisoa tsohle tseo u li hlokang hang-hang kapa u li kenye ha u li hloka.

• Bandwidth ho fihla ho 1 GHz

• Liteishene tsa dijithale: Khetho ea MSO e eketsa liteishene tse 16 tsa dijithale

• Spectrum Analyzer ho fihla ho 3 GHz

• DVM/Freq Counter (mahala ka ngoliso)

• Jenereithara e sa reroang/e sebetsang

• Tlhahlobo e tsoetseng pele

• serial libese decoding le ho qala

• Litekanyo tsa Matla a Iketselitsoeng

Bona bokhoni boo 3 Series MDO e ka e tlisang bencheng ea hau.

Tokollo ea firmware ea Hlakubele 2022 e thusa likarolo tse ncha

Teko ea Mask / Moeli

E le karolo ea boitlamo ba rona ba ho fana ka lintlafatso tsa sehlahisoa tse kopiloeng haholo ke bareki ba rona, 3 Series MDO oscilloscope joale e kenyelletsa Teko ea Mask / Limit. Sena se lumella baenjiniere ho hlalosa maemo a thata a ho bapisa a khethollang mekhoa e thata ho e fumana.

Ka ntlafatso ena e ncha ea firmware, u ka:

• Theha, hlophisa, 'me u boloke tlhaloso ea mask

• Beha mamello ea waveform bakeng sa mask

• Lokisa Ketso ho Ketsahalo

Na u se u na le 3 Series MDO? Fumana lintlha tsa hau tsa mahala.

Ke Hobane'ng ha U Re Khetha:

1. U ka fumana boitsebiso bo phethahetseng ho ea ka tlhokahalo ea hau bonyane theko e khonehang.

2. Re boetse re fana ka Reworks, FOB, CFR, CIF, le litheko tsa ho fana ka ntlo le ntlo. Re u khothalletsa hore u etse tumellano ea ho tsamaisa thepa e tla u baballa haholo.

3. Thepa eo re fanang ka eona e ka netefatsoa ka botlalo, ho tloha ho setifikeiti sa tlhahlobo ea thepa e tala ho isa polelong ea ho qetela.(Litlaleho li tla hlaha ho latela tlhoko)

4. e tiisetso ea ho fana ka karabo nakong ea lihora tse 24(hangata ka hora e tšoanang)

5. U ka fumana mefuta e meng ea li-stock, ho tsamaisoa ha leloala ka ho fokotsa nako ea tlhahiso.

6. Re inehetse ka ho feletseng ho bareki ba rona. Haeba ho ke ke ha khoneha ho finyella litlhoko tsa hau ka mor'a ho hlahloba likhetho tsohle, re ke ke ra u khelosa ka ho etsa litšepiso tsa bohata tse tla theha likamano tse ntle tsa bareki.

Netefatso ea Boleng(ho kenyeletsoa ka bobeli e Senyang le e sa Senyeng)

1. Teko ea Visual Dimension

2. Tlhahlobo ea mochini joalo ka tensile, Elongation le phokotso ea sebaka.

3. Tlhahlobo ea phello

4. Tlhahlobo ea tlhahlobo ea lik'hemik'hale

5. Teko ea boima

6. Teko ea tšireletso ea likoti

7. Penetrant Test

8. Intergranular Corrosion Testing

9. Teko ea ho Roughness

10. Metallography Teko ea Teko