Abrasives Small Machine Tool metal cutting machine

Your email address will not be published. Required fields are marked with *

description

Pliers and Machine Tool Fixtures

Flat-nose vise, also known as machine vise, is a general-purpose fixture that is often used to install small workpieces. It is a random accessory for milling machines and drilling machines. It is fixed on the machine table to clamp the workpiece for cutting. Milling machines, drilling machines, grinding machines, machine tool attachments for holding workpieces. The machine tool fixture is a device on the machine tool used to clamp the workpiece and guide the tool. Refers to a fixture specially designed for a certain process of a workpiece.

	Fastening screws to fasten small parts The fastening screw is a kind of screw specially used for fixing the relative position of the parts.		Machine flat pliers Machine vise, also known as machine vise, is a machine tool accessory used to clamp and process workpieces when machining with machine tools.
	Chuck A chuck is a mechanical device used on a machine tool to clamp a workpiece. A machine tool accessory that clamps and positions the workpiece by the radial movement of the movable jaws evenly distributed on the chuck body. The chuck is generally composed of three parts: the chuck body, the movable jaw and the jaw drive mechanism.		Precision Bench Vise The precision bench vice is mainly used to clamp (press and fix) the product workpiece when milling the workpiece (workpiece) on the machine tool.
	spacer Adjustment metal blocks for machine tools, etc.		Parallel blocks for machine tools Parallel blocks for machine tools to eliminate unbalance that may occur during fixture rotation.
	Platen Platen Set The press plate is a prepreg obtained by dipping a thermosetting resin containing no halogen-based flame retardant on a substrate obtained by impregnation treatment with a solution containing an alkoxysilane derivative and/or its condensate, and heating and drying it. Several sheets of this prepreg are stacked, and copper foils are stacked on one side or both sides of the prepreg as required, and then heated and pressure-laminated.		Quick clamp A new type of manual clamp and pneumatic clamp product that can be accurately positioned and quickly clamped. It is a clamp product widely used in product welding, riveting, bonding, machining, assembly, logistics and other technological processes. It can also be used Fixing of a part of the equipment.
	V iron V-type iron is used for shaft inspection, correction, marking, and can also be used to inspect the verticality and parallelism of workpieces. Inspection, scribing, setting of precision shaft parts and clamping in machining.		Hydraulic vise Hydraulic pliers are mainly used in the clamping of product workpieces of machine tool equipment, and cooperate with the processing of machine tool equipment. At present, milling machines, CNC machining centers, drilling and tapping machines, hydraulic dual-axis compound machines and other equipment are used.
	Precision Cross Table It is installed on the processing machinery to realize the relative movement in the horizontal and vertical directions, and at the same time, it uses the clamps and tools fixed on the worktable to move to achieve the purpose of processing.		Angle block The angle block is determined by the angle between two adjacent working planes. It is a high-precision measuring tool. It can be used to verify the indication error of the angle measuring tool, check the angle of the angle sample block and the part, and measure the angle block I of the precision machine tool during the machining process. Adjust the angle in the model.

Tool holders and accessories

The tool holder is a tool, which is the connection between the mechanical spindle and the tool and other accessories. At present, the main standards are BT, SK, CAPTO, BBT, HSK and other spindle models.

	ER collet holder ER chuck tool holder is a tool holder for a cylindrical fixture that is used to hold drilling and tapping tools or milling tools on the spindle of drilling, tapping, milling machines or machining centers.		Reducer The reducing sleeve is a taper sleeve with different taper numbers on the inner and outer cone surfaces, and the outer cone is connected with the taper hole of the machine tool. The inner and outer taper surfaces have taper sleeves with different taper numbers, the outer taper is connected with the taper hole of the machine tool, and the inner taper hole is connected with the tool or other accessories.
	Reducer socket rod The reducing sleeve can be divided into various types: Morse reducing sleeve, lengthening reducing sleeve, open tail reducing sleeve, connecting rod reducing sleeve, flat tail reducing sleeve, 7:24 reducing sleeve, etc. Non-standard made to order.		Thermal expansion tool holder The principle of thermal expansion tool holder is to use the difference between the thermal expansion coefficient of the tool holder (special stainless steel) and the tool (carbide) to clamp the tool with strong and high precision. The accuracy is no less than that of the hydraulic tool holder, and the runout is about 0.0025mm.
	Disc Milling Shank The shank of the disc milling cutter.		Drill chuck shank shank for drill chuck knives
	Handle lock holder The tool holder lock holder is also called the tool remover and the BT double-head lock holder. It is a machine tool accessory used for CNC and machine tool holder locking.		ER pressure cap The design of the pressure cap for ER milling chuck, including structure, parameters, technical requirements, test inspection, packaging and storage, etc.
	Tap holder A handle is a tool used to turn a tap used to make internal or external threads. The main body is die-casting zinc, steel, ductile iron and other tools, with high strength and durability.		Reducer wedge Reducer wedges are high-quality traditional workholding equipment. Made of high-quality steel, the outer shell is fully hardened. All drill bushes and sleeves are fully hardened and ground internally and externally.

Tool holder

Parts for clamping tools.

	ER Collet (Spring Collet) ER collet, commonly known as spring collet, is a drill chuck mounted on the spindle of a machine tool. Its function is to lock the connection between the tool and the spindle.		Milling chuck It is installed on the end of the spindle of the milling machine and is used to clamp the chuck of the milling cutter.
	Tapping chuck Tapping chuck is an internal thread processing machine tool fixture, a multi-purpose tool series for holding taps, with a wide variety. It is one of the most common fixtures in machining.		Self-tightening drill chuck Self-tightening drill chuck is a kind of machine tool accessories, mainly used to hold drilling tools to drill holes. It can be installed on lathes, milling machines, drilling machines, woodworking planers, hand drills, and impact drills. Self-tightening drill chuck is a drill holding tool, which is widely used in machinery manufacturing, building decoration and other fields.
	Drill chuck accessories TDrill chuck related accessories.		CNC tool holder The tool holder is the device used by the machine tool to clamp the tool. Numerical control is a technology that uses digital information to control mechanical movements and working processes.
	One-piece drill chuck It is suitable for high-precision cutting equipment, and is suitable for a variety of productive drilling tools, coordinate boring machines, milling machines, and lathes.		Drill chuck wrench Wrench for removing and installing drill chucks
	Taper hole drill chuck The tapered hole drill chuck is composed of a drill jacket, an elastic dial ring, a connecting block and a back cover. Drill chucks are mainly used for domestic DC and AC drills. Its biggest advantage is that it is easy to lock, as long as you hold the front and rear sleeves of the collet and tighten it to use.		-- --

Metal cutting machine

A metal cutting machine tool is a machine that processes metal blanks into machine parts by cutting methods, and people are accustomed to calling them machine tools. Metal cutting machine tools include lathes, milling machines, grinders, gear processing machines, drilling machines, boring machines, slotting machines, broaching machines, CNC machine tools, special processing machine tools and other machine tools.

	Lathe A lathe is a machine tool that mainly uses a turning tool to turn a rotating workpiece. On the lathe, drills, reamers, reamers, taps, dies and knurling tools can also be used for corresponding processing.		Drill press Drilling machine refers to a machine tool that mainly uses a drill to machine holes in a workpiece. Usually the rotation of the drill bit is the main movement, and the axial movement of the drill bit is the feed movement. The drilling machine has a simple structure and relatively low machining accuracy. It can drill through holes and blind holes, replace special tools, and can expand, countersink, ream or tap.
	Grinder Grinders are commonly used equipment for sharpening various knives and tools, and are also used for grinding, deburring and cleaning of ordinary small parts. It is mainly composed of base, grinding wheel, motor or other power source, bracket, protective cover and water supply.		Grinder A grinder is a machine tool that uses abrasive tools to grind the surface of a workpiece. Most grinding machines use high-speed rotating grinding wheels for grinding, and a few use oilstone, abrasive belts and other abrasives and free abrasives for processing, such as honing machines, superfinishing machines, belt grinders, grinding machines and polishing machine etc.
	Drilling and Milling Machine Drilling and milling machine is a machine tool that integrates drilling, milling, boring and grinding, and is used in the processing of small and medium-sized parts.		Tapping machine The tapping machine is also called the tapping machine. Tapping machine is a kind of machine that processes internal threads, screws or snaps on the inner side of holes of various parts with through holes or blind holes of different specifications, such as machine shells, equipment end faces, nuts, flanges, etc. Mechanical processing equipment.
	Sawing machine The servo position control module of the sawing machine system adopts a combination of sampling interpolation and predictive control to determine the position of closing the feeding cylinder, so that the feeding cylinder just reaches the target position when it stops. Due to the electromagnetic mechanical lag and motion inertia, it is almost impossible to control the feeding slide table to move 0.1mm by "on" and "off".		Grinder Grinding machine refers to a grinding machine that grinds the surface of a workpiece with a grinding tool coated or embedded with abrasives.
	knife sharpener The knife sharpener was first called the end face sharpener, which was mainly used for grinding knives, and its structure was mainly gantry type.		Cutting Machine Although the semi-automatic cutting machine reduces the labor intensity of workers, its function is simple, and it is only suitable for cutting parts with relatively regular shapes. Compared with manual and semi-automatic cutting, CNC cutting can effectively improve the efficiency and quality of plate cutting, and reduce the labor intensity of operators.
	Milling machine Milling machines mainly refer to machine tools that use milling cutters to process various surfaces of workpieces. Usually, the milling cutter mainly moves by rotation, and the movement of the workpiece and the milling cutter is the feed movement. It can process planes, grooves, and various curved surfaces, gears, etc.		Gear grinding machine A gear processing machine tool that uses a grinding wheel as a grinding tool to process cylindrical gears or certain gears (helical gears, bevel gears, etc.) to process the tooth surface of the tool. Mainly used to eliminate deformation after heat treatment and improve gear accuracy.
	CNC machining center CNC machining center is a high-efficiency automatic machine tool composed of mechanical equipment and CNC system suitable for processing complex parts. It is developed from CNC milling machines. The biggest difference from CNC milling machines is that the machining center has the ability to automatically exchange machining tools.		Tool setter In the processing of a workpiece, the pure maneuvering time only accounts for about 55% of the total time, and the auxiliary time such as clamping and tool setting accounts for 45%. The use of the tool setter can help to greatly shorten the tool setting time.
	Gear processing machine Gear processing machine Gear processing machine is a machine tool for processing various cylindrical gears, bevel gears and other toothed parts. There are many varieties and specifications of gear processing machine tools, including small machine tools for processing gears with a diameter of several millimeters, large machine tools for processing gears with a diameter of more than ten meters, high-efficiency machine tools for mass production and high-precision machine tools for processing precision gears.		Grinding wheel dresser Grinding wheel dresser is an auxiliary tool for dressing the size, shape and geometric angle of the grinding wheel of the grinding machine.

Forging machine

Forging machine tools are equipment for metal and mechanical thermal processing, which only change the outer shape of the metal. Forging machine tools include plate rolling machines, shearing machines, punching machines, presses, hydraulic presses, hydraulic presses, bending machines, etc.

	Press The press is a compact general-purpose press. With a wide range of uses and high production efficiency, the press can be widely used in cutting, punching, blanking, bending, riveting and forming processes. Parts are machined by applying strong pressure to a metal blank to plastically deform and fracture the metal.		Shearing machine The shearing machine is a machine that uses one blade to reciprocate linear motion relative to the other blade to cut the plate. With the help of the moving upper blade and the fixed lower blade, a reasonable blade gap is used to apply shearing force to the metal plates of various thicknesses, so that the plates are broken and separated according to the required size.
	Chamfering machine Chamfering machine is a small precision machine tool specialized in mold manufacturing, hardware machinery, machine tool manufacturing, hydraulic parts, valve manufacturing, textile machinery chamfering and deburring of products such as milling and planing.		Folding machine A folding machine is a machine that processes the edges of a product.
	Punch A punch is a punching press. In national production, the stamping process saves materials and energy compared with traditional machining, has high efficiency, does not require high technical requirements for operators, and can make products that cannot be achieved by machining through various mold applications.		Rolling machine The plate bending machine is a kind of equipment that uses work rolls to bend and form sheet materials. It can form parts of different shapes such as cylindrical parts and conical parts. It is a very important processing equipment.

Special machine tools and other machine

Special processing machine tools are methods that use corresponding machine tools to process using electrical energy, electrochemical energy, light energy and sound energy.

	Peeler A wire stripper is a machine that strips the plastic sheath and the metal core of the wire and the like. Due to the difference in wire diameter and wire material and composition, there are different suitable models: short and thin wire type, large square type, flat wire type, sheathed wire, coaxial wire type and other computer wire stripping machines. Can be divided into intelligent computer stripping machine, high-speed stripping machine, automatic stripping machine, electric stripping machine, pneumatic stripping machine, cable stripping machine, cable stripping machine, sheath wire stripping machine, coaxial wire Peeler.		EDM EDM, referred to as EDM, full name Electrical Discharge Machining is a kind of mechanical processing equipment, mainly used for EDM machining. It is widely used in the manufacture of various metal molds and mechanical equipment. EDM is a special processing method that uses the electro-erosion effect generated by the pulse discharge between the two poles immersed in the working fluid to erode conductive materials, also known as electrical discharge machining or electro-erosion machining, English abbreviation EDM.
	Heat treatment machine Heat treatment machine tool refers to a metal thermal processing equipment that obtains the expected structure and properties by means of heating, heat preservation and cooling in a solid state.		Foundry machine Foundry machine tool refers to a machine tool with a processing method that melts solid metal into a liquid state and pours it into a mold of a specific shape, and then waits for it to solidify and form. The metals to be cast include: copper, iron, aluminum, tin, lead, etc. The materials for common castings are raw sand, clay, water glass, resin and other auxiliary materials. Special casting molds include: investment casting, lost foam casting, metal mold casting, ceramic mold casting, etc.

Why Choose Us:

1. You can get the perfect material according to your requirement at the least possible price.

2. We also offer Reworks, FOB, CFR, CIF, and door to door delivery prices. We suggest you to do deal for shipping which will be quite economical.

3. The materials we provide are completely verifiable, right from raw material test certificate to the final dimensional statement.(Reports will show on requirement)

4. e guarantee to give a response within 24hours(usually in the same hour)

5. You can get stock alternatives, mill deliveries with minimizing manufacturing time.

6. We are fully dedicated to our customers. If it will not possible to meet your requirements after examining all options, we will not mislead you by making false promises which will create good customer relations.

Quality Assurance(including both Destructive and Non-Destructive)

1. Visual Dimension Test

2. Mechanical examining like tensile, Elongation and reduction of area.

3. Impact analysis

4. Chemical examination analysis

5. Hardness test

6. Pitting protection test

7. Penetrant Test

8. Intergranular Corrosion Testing

9. Roughness Testing

10. Metallography Experimental Test